How To Assemble - Yamaha YZF-R1 Assembly Instructions

To begin
Tools and materials needed
-Ruler - scissors - blade cutter or "Exacto-knife" - awl or
other pointed tool (for making a folding crease) - felt pen
- pin set - glue - hand towel ( for cleaning your fingers) -
dictionary or other heavy book ( to press the papers flat).
Items of Caution
*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size. There
may be differences in dimensions, depending on the
type of printer used.

How to assemble

*Follow the working method and markings carefully.
*Cut carefully along the outter line with cutting blade,
Exacto-knife or scissors.
One - point Advice
*Cut carefully with cutting blade, Exacto-knife or
scissors.
*For folding parts, first use an awl or other pointed
tool to make a light crease along the dotted or solid
line. This will make the folds straight. Avoid making
strong creases, as this will cause the paper to tear.
*As an adhesive, white wood glue is recommended.
Avoid over application as this may cause the paper to
wrinkle.
*Before beginning assembly, test adhesive amounts
on extra paper.
*Occasionally, white spots will be apparent on folds
and cuts. Use a marker or pencil to fill in these spots.
It is recommended that this be done after each stage
of assembly because coloring becomes more difficult
once parts are assembled.
Note
Basic working method and markings
Solid lines
Fold along these lines.
The printed surface should be
on the outside of the folded shape.
Broken lines
Fold along these lines.
The printed surface should be
on the inside of the folded shape.
Dotted line
Cut along these lines.
Do not fold or cut the parts
marked .
Cut out parts marked with an
asterisk(*).
Red dots are the reference
positions for gluing surfaces.
Please glue them by aligning
the red and red/blue and blue
parts if they are marked on
the paper.
2