Announcing A Call Transfer; Using Blind Call Transfer; Call Forward - LG-Ericsson LIP-8002 User Manual

3.4. Announcing a Call Transfer

Using Announcing a Call Transfer, you send an active call to another extension after announcing the call
transfer to the receiving party.
To transfer an active call:
o Press the Transfer button. The active call status changes to hold and you receive dial tone.
o Dial the number you wish to receive the transfer.
o Await answer and announce the transfer.
o To complete the transfer, hang up the handset.
To cancel a transfer, for example the second party does not answer or is busy:
o Press the Transfer button.

3.5. Using Blind Call Transfer

You can transfer an active call to another extension without talking to the party receiving the call. The call
transfers to the new party without verifying that the new party is there or willing to receive the call.
To transfer an active call without announcing the transfer:
o Assign the Blind Transfer function to the flexible button.
o Press the Blind Transfer flexible button. The active call status changes to hold and you receive dial
tone.
o Dial the number you wish to receive the transfer.
o To complete the transfer, hang up the handset.

3.6. Call Forward

Call forward directs incoming calls to ring at another location that you designate. You can select one of
four (4) conditions that will forward your calls:
Call Forward Busy – redirects incoming calls if the line is busy.
-
Call Forward No Answer – redirects incoming calls that are not answered in the configured no
-
answer time.
Call Forward All Calls – immediately redirects all incoming calls.
-
To set up Call Forward:
o Press the Forward button.
o Use the Up/Down navigation button to select the desired Call Forward condition.
o Press the OK button.
o Input the destination where you want your calls sent.
o Press the OK button. The display shows "(x) Fwd to ext" indicating the forward condition and
destination for the calls.
(B) = Busy, (N) = No-answer, (U) = Unconditional
To disable Call Forward:
o Press the Forward button. The message "(x) Fwd to xxxx" disappears from the LCD.
LIP-8002/8002A iPECS IP Phone
5
User Guide