Windows Xp Plug And Play - Canon LBP-810 User Manual

Windows XP Plug and Play

Following is the installation procedure of plug and play for "Using USB
and Parallel Port" under Windows XP.
Before you install the software, make sure you do the following:
❏ Connect the printer to your computer (For details, see the Getting
Started Guide).
❏ Turn on the printer (For details, see the Getting Started Guide).
❏ Start up Windows XP.
Using USB Port (USB Cable)
In order to use the printer via USB, the following requirements need to be
satisfied.
❏ Your computer must be equipped with a USB port and it is necessary
that its operation is approved by the manufacturer.
❏ Windows NT 4.0 is not available for USB.
When using parallel port, go Step 2.
1. Plug and Play is being carried out and the USB class driver, "USB
Printing Support" is automatically detected and installed.
2. Log on as member of Administrators. The full control access right
for the printer is necessary for the installation of the CAPT.
Chapter 3 Using the Canon Advanced Printing Technology
39