Sharp PN-U553 Operation Manual page 23

nAUDIO
TREBLE
Adjusts the volume of treble-level sound.
BASS
Adjusts the volume of bass-level sound.
BALANCE
Adjusts the balance of the audio sound between right and left.
RESET
Resets the values of the AUDIO menu items to the factory preset values.
Select "ON" and then press
nSETUP
DATE/TIME SETTING
Set the date and time. Press
Set the date in "Year/Month/Day" order.
Set the time on a 24-hour basis.
SCHEDULE (See page 27.)
You can turn the power on/off at a specified time.
LANGUAGE
Sets the display language for the menu screen.
INPUT SELECT
HOT PLUG CONTROL
Sets whether to use hot plug control for the DVI-D and HDMI input terminals.
AUDIO SELECT
Selects the terminal used to input audio signals in each input mode.
COMMUNICATION SETTING
RS-232C/LAN SELECT
Selects the method with which to control the monitor from the computer.
LAN SETUP
Configures the settings to control the monitor from the computer via LAN. (See page 39.)
ID No. SET
Assigns ID numbers to monitors connected in a daisy chain (see page 31), using the RS-232 cables.
The numbers 1 to 26 are available for ID numbers.
If "0" is set, the system regards this as the state where no ID number is set.
INFORMATION
Displays monitor information (model, serial number, MAC address).
ENTER
.
or to select the date and time, and press
Menu Items
or to change the numerical values.
23
E