Changing The Scan Key Settings; Before Scanning; Scan Key Settings - Brother DCP-7055 Basic User's Manual

Changing the SCAN key settings

Before scanning

To use the machine as a scanner, install a scanner driver. If the machine is on a network,
configure it with a TCP/IP address.
 Install the scanner drivers on the Installation CD-ROM. (See the Quick Setup Guide.)
 Configure the machine with a TCP/IP address if network scanning does not work. (See
Configuring Network Scanning in the Software User's Guide.)

SCAN key settings

You can change your machine's SCAN key settings using ControlCenter4.
a
Open ControlCenter4 by clicking start/All Programs/Brother/XXX-XXXX (where
XXX-XXXX is your model name)/ControlCenter4. The ControlCenter4 application will open.
b
Make sure the machine you want to use is selected from the Model pull-down list.
c
Click the Device Settings tab.
d
Click Device Scan Settings.
How to scan to a computer
6
6
6
6
29