Loading Paper In Paper Tray #2 (Mfc-J6710Dw Only) - Brother MFC-J6510DW Basic User's Manual

i
While holding the paper tray in place,
pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Note
Before you shorten Tray #1, take the
paper out of the tray. Then shorten the
tray by pressing the universal guide
release button (1). Adjust the paper length
guide (2) to fit the paper size you are
going to use. Then put the paper into the
tray.
Loading paper in paper
tray #2 (MFC-J6710DW only)
Note
• You can only use plain paper sizes A4,
A3, Ledger, Letter or Legal in Tray #2.
• When you use the Borderless printing
2
feature paper must be fed from Tray #1.
1
a
Pull the paper tray completely out of the
machine.
Note
• If you are using A3, Ledger or Legal size
paper, press the universal guide release
1 button (1) as you slide out the front of the
paper tray until it clicks.
• You can check if the length of the tray is
adjusted correctly by opening the paper
tray cover.
2
Loading paper
2
2
1
13