Completing The Parts Replacement - Lenovo ThinkCentre Hardware Maintenance Manual

Figure 55. Installing the WiFi antennas
Notes:
• The black cable should be connected to the WiFi card connector 1. The grey cable should be
connected to the WiFi card connector 2.
• Ensure that the WiFi cables are routed correctly. Keep the WiFi cables clear of the hinges and sides
of the computer chassis to avoid interference with reinstalling the computer cover.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 126.

Completing the parts replacement

After completing the installation or replacement for all parts, you need to reinstall the computer cover and
reconnect cables. Depending on the parts you installed or replaced, you might need to confirm the updated
information in the Setup Utility program. Refer to Chapter 6 "Using the Setup Utility program" on page 57.
To reinstall the computer cover and reconnect cables to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer. See "Locating major FRUs and CRUs (for models with the 20-inch display)" on
page 73 or "Locating major FRUs and CRUs (for models with the 23-inch display)" on page 76 for the
locations of various components in your computer.
2. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference with reinstalling the computer cover.
126
ThinkCentre Hardware Maintenance Manual