Fujitsu Siemens Computers D1218 Technical Manual

Fujitsu Siemens Computers D1218 Technical Manual

System board

Advertisement

ADDITIONAL TECHNICAL
ADDITIONAL TECHNICAL
ADDITIONAL TECHNICAL
ADDITIONAL TECHNICAL
MANUAL
MANUAL
MANUAL
MANUAL
S Y S T E M B O A R D D 1 2 1 8 /
S Y S T E M B O A R D D 1 2 1 8 /
S Y S T E M B O A R D D 1 2 1 8 /
S Y S T E M B O A R D D 1 2 1 8 /
D 1 2 1 9
D 1 2 1 9
D 1 2 1 9
D 1 2 1 9

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu Siemens Computers D1218

  • Page 1 S Y S T E M B O A R D D 1 2 1 8 / S Y S T E M B O A R D D 1 2 1 8 / S Y S T E M B O A R D D 1 2 1 8 / S Y S T E M B O A R D D 1 2 1 8 / D 1 2 1 9 D 1 2 1 9...
  • Page 2 Our Hotline: Mo-Fr: 8 a.m. - 6 p.m. Sat: 9 a.m. - 2 p.m. Tel.: ++49 (0) 180 3777 005 your sales outlet The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.com/mainboard...
  • Page 4 Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH A26361-D1218-Z180-1-7619 A26361-D1218-Z180-1-7619 A26361-D1218-Z180-1-7619 A26361-D1218-Z180-1-7619 Bestell-Nr./Order No.:...
  • Page 5: System Board

    System Board D1218 / D1219 Additional Technical Manual November 2000 edition...
  • Page 6 All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2000 All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved.
  • Page 7: Table Of Contents

    Functions controlled by the configuration switch .............. 14 Power ............................15 Power requirement ......................15 Power loadability......................15 Documentation ..........................15 Installing drivers ..........................15 Upgrading main memory ......................... 16 Troubleshooting..........................16 Message BIOS update......................16 The screen stays blank......................16 A26361-D1218-Z180-1-7619...
  • Page 9: Introduction

    Place the system board and the components on a grounded antistatic pad whenever you work outside the computer. Once you have installed the system board, you should remove the battery protection (i.e. the thin plastic plate between battery and contact spring). A26361-D1218-Z180-1-7619 English -...
  • Page 10: Features

    Features Features The table shows two assembly versions of this system board as example. Function Version D1218-A1X Version D1218-B1X Processor socket PGA 370 PGA 370 Processor Intel Celeron or Pentium III Intel Celeron or Pentium III Formfactor Front Side Bus in MHz...
  • Page 11 Chipcard reader Save to Disk (ACPI S4) Save to RAM(ACPI S3) Game/midi port LAN onboard Ethernet Contr. 82562EM Ethernet Contr. 82562EM Audio onboard AD1885 AD1885 VGA onboard i 815E i 815E USB ports extern USB ports intern English - 3 A26361-D1218-Z180-1-7619...
  • Page 12: Mechanics

    Mechanics Mechanics Layout System board D1218 ATX 12" x 8’’ (304,8 mm x 203.2 mm) Some of the following connectors are optional and may therefore not be included on your system board. DIMM 3 DIMM 2 DIMM 1 1 = PS/2 Mouse Controller...
  • Page 13 6 = Fan 1 (e. g. for the processor) 6 = Connector for control panel and 7 = Power supply monitoring loudspeaker 8 = Cover monitoring 7 = Wake On LAN The components and connectors marked are not necessarily present on the system board. English - 5 A26361-D1218-Z180-1-7619...
  • Page 14 4 = USB ports 1 and 2 9b = Audio Line-In 5 = Serial port 1 9c = Audio Micro-In 6 = Parallel port The components and connectors marked are not necessarily present on the system board. 6 - English A26361-D1218-Z180-1-7619...
  • Page 15 7 = Wake On LAN The components and connectors marked are not necessarily present on the system board. *) only for speed controllable fans (3 pin connector), for 2 pin processor fans use Fan2 connector only. English - 7 A26361-D1218-Z180-1-7619...
  • Page 16: Connectors

    Serial chipcard reader or internal serial port 2 (COM 2) external via optional cable Signal Signal DCD 2 DSR 2 SIN 2 RTS 2 SOUT 2 CTS 2 DTR 2 PC_On_Strobe VCC Auxiliary EXT SMI (low asserted) RESET (high asserted) 8 - English A26361-D1218-Z180-1-7619...
  • Page 17: Front Panel Connector

    1) Pin 8 is connected to VCC if audio is not onboard. Pin 8 is connected to GND if audio is onboard. 2) The sleep button (optional) functions only for operating systems with APM (not with ACPI). English - 9 A26361-D1218-Z180-1-7619...
  • Page 18: Fan 2 Connector

    (max 1 second low pulse) Data positive Data negative Over current (low asserted) VCC Dual (max. 250mA) VCC Dual (max. 250mA) Power supply on (max 1 second low pulse) Data positive Data negative Over current (low asserted) 10 - English A26361-D1218-Z180-1-7619...
  • Page 19: Usb Port - Single Channel

    VCC Dual (max. 250mA) Reserved Power supply on (max 1 second low pulse) Data positive Data negative Over current (low asserted) CD-ROM audio connector (internal) Signal Left CD audio input CD GND CD GND Right CD audio input English - 11 A26361-D1218-Z180-1-7619...
  • Page 20: Auxiliary (Mpeg, Tv) Audio Connector (Internal)

    Left AUX audio input Analog GND Analog GND Right AUX audio input Fan 1 connector (processor fan - controlled and supervised, only for 3 pin fans) Signal Controlled fan voltage (0 V / 6...12 V) Fan sense 12 - English A26361-D1218-Z180-1-7619...
  • Page 21: Power Supply Monitoring

    PS FAN off request (low asserted) PS FAN full on (low asserted) PS FAN pulse SMB CLK SMB DATA VCC EEPROM Intrusion connector for case open detect for optional push-button (opener) Signal Case open (low asserted) Intrusion switch present (low asserted) English - 13 A26361-D1218-Z180-1-7619...
  • Page 22: Configuration

    Low auxiliary power supply (<2 A) High auxiliary power supply PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered wake devices (WakeOnLAN, USB, PCI) in S3-S4. 14 - English A26361-D1218-Z180-1-7619...
  • Page 23: Power

    If the CD doesn't start automatically call the START.EXE file in the main directory of the CD. Ê If the system board list is displayed select the system board or select under Driver the operating system used and the audio and video drivers. English - 15 A26361-D1218-Z180-1-7619...
  • Page 24: Upgrading Main Memory

    If you have any problems with ACPI please ensure that all of your components are supporting ACPI S3 and S4. Operating system Hardware and drivers of controllers (e. g. VGA, audio, LAN, SCSI controllers). For further information please refer to http://developer.intel.com/technology/iapc/involve.htm . 16 - English A26361-D1218-Z180-1-7619...

This manual is also suitable for:

D1219

Table of Contents