Fujitsu Siemens Computers D1215 Technical Manual page 12

Features
·
1 PCI slot or 3 PCI slots
Up to three PCI slots are available, which support 3.3 V main and auxiliary voltages.
·
AGP/GPA slot
The AGP slot supports the 1x, 2x and 4x AGP mode and GPA memory boards. The voltage is
detected and configured automatically.
or
GPA memory boards supported.
·
IDE hard disk controller connected to PCI bus for up to four IDE drives
(e.g. IDE hard disk drives, ATAPI CD-ROM drives)
The IDE hard disk controller are ATA33/66/100, ultra DMA capable and support PIO modes 0-
4.
·
Floppy disk drive controller (possible formats: 720 KB, 1.44 MB, 2.88 MB)
·
The system board supports booting from a 120 MB IDE floppy disk drive.
·
2D/3D graphics processor, 24 bit 230 MHz RAMDAC
GPA memory modules for enhanced 3D graphics performance is supported.
·
Monitor connector: Sub D
·
1 external parallel port (ECP- and EPP-compatible)
·
1 external serial port (16C550 compatible with FIFO)
·
1 internal chipcard reader interface (SmartCard reader). This interface can also be used as a
second serial port (16C550 compatible with FIFO). This port does not support the ring indicator
signal.
·
1 internal WOL interface
·
2 external PS/2 ports for keyboard and mouse
·
2 external USB ports
·
2 internal USB ports
·
Real-time clock/calendar with integrated battery backup
4 - English
A26361-D1215-Z120-6-7419