Wall Mounting - Motorola D1001 User Manual

12. Wall mounting

• To wall-mount the charger, drill two holes in the wall
3.2cm apart horizontally using an 8mm drill bit.
IMPORTANT
Before you wall-mount your D1000, check that you are not
drilling into any hidden wiring or pipes.
Before you drill, make sure the power and telephone line
cables will reach the sockets.
1. Use the following templates to mark the drilling locations.
• To wall-mount the base, drill two holes in the wall 4.5cm
apart horizontally using an 8mm drill bit.
42 Wall mounting