Table of Contents
Advertisement
INVERTER SETTING AND DISPLAY
5.5.3
Pr.449 SSCNET III input filter setting
Filter to the following input signal can be selected using position feed filter.
Upper stroke limit (when Pr.178 STF terminal function selection = "60 (initial value)")
Lower stroke limit (when Pr.179 STR terminal function selection = "61 (initial value)")
Proximity dog input (when Pr.185 JOG terminal function selection = "76")
Pr.449 Setting
Input signal filter (maximum)
0
Disabled (0.88ms sampling)
1
2
3
4 (initial value)
*
Change in the Pr.449 setting is immediately reflected.
5.5.4
Pr.52 DU/PU main display data selection
SSCNET ΙΙΙ communication status can be selected for the PU (FR-DU07/FR-PU07) display.
To display it, set "39" in Pr. 52 and select the voltage monitor (third monitor). Refer to page 32 for the
SSCNET ΙΙΙ communication status.
At the occurrence of the CF warning, the SSCNET ΙΙΙ communication status and "CF" are displayed
alternately. (Refer to page 75 for CF warning.)
Parameter
Name
Number
DU/PU main display
52
data selection
REMARKS
For the set values of other than "39", refer to the inverter manual.
48
0.88ms
1.77ms
2.66ms
3.55ms
Setting Range
0, 5 to 14, 17, 18, 20, 23 to 25,
32 to 34, 39, 50 to 57, 100
Remarks
When "39" is set, "SSCNET ΙΙΙ communication status
monitor" is displayed instead of the voltage monitor.
Advertisement
Table of Contents
