Resetting Your Product - Franklin BES-1850 User Manual

If the keyboard fails to respond, or if the screen performs erratically, perform a system
reset by following the steps below.
1. Hold CLEAR and press ON/OFF.
If nothing happens, try Step 2.
2. Use a paper clip to gently press the reset button on your unit.
The reset button is recessed in a pin-sized hole next to the book card slot.
Warning! Pressing the reset button with more than light pressure may permanently disable
your product. In addition, resetting product erases settings and information
entered in its built-in book, and in an installed bookcard.
This unit may change operating modes due to Electrostatic
Discharge. Normal operation of this unit can be re-established by
pressing the reset key, ON/OFF, or by removing/replacing batteries.

Resetting Your Product