Adaptation To Different Kinds Of Gas - Electrolux EKK 60331 Instruction Booklet

Electrolux mixed fuel cooker
Table of Contents

Advertisement

Adaptation to different kinds of gas

To adapt the appliance to a different
kind of gas from the one the appliance
has been set for, follow the instructions
below in their order.
Hob burners nozzles
1. Nozzles replacement
1. Remove the pan supports.
2. Extract the caps and the wall baffles
of the burners.
3. Using a socket spanner 7 unscrew
and remove (Fig. 16) the nozzles re-
placing them with the ones required
for the kind of gas in use (see table
"Burner characteristics").
4. Reassemble the parts following the
same procedure backwards.
These burners do not need any pri-
mary air regulation.
2. Adjustment of minimum level
2. Adjustment of minimum level
2. Adjustment of minimum level
2. Adjustment of minimum level
2. Adjustment of minimum level
To adjust the minimum level:
1.
turn the knob to the position of
minimum flame.
2.
Remove the knob (Fig. 17).
3a. When converting from natural gas
to liquid gas, tightly screw the by-
pass screw of the cocks.
3b. When converting from liquid gas to
natural gas unscrew about one-
fourth turn by-pass screw, until a
regular small flame is reached.
4.
Reassemble the parts following the
same procedure backwards.
Check that, turning quickly the knob
from the maximum position to the mini-
mum one, the flame does not go out.
electrolux 33
By-pass screw
Fig. 16
Fig. 17

Advertisement

Table of Contents
loading

Table of Contents