Ducati SPORT 1000 S Owner's Manual page 41

2) Make sure that the stop switch (1, fig. 31) is in the
RUN position, then press the starter button (2, fig. 31).
This model has servo-assisted starting.
To use the servo-assisted starting feature, press the start
button (2) and release it immediately. When you press the
button (2) the starter motor operates automatically for a
maximum time determined by the engine temperature.
E
The system disengages the starter motor as soon as the
engine starts. If the engine fails to start, wait at least
2 seconds before pressing the start button (2) again.
Allow the engine to start without turning the throttle twistgrip.
Important
Do not rev the engine when cold. Allow some time for
the oil to warm up and reach all points that need lubricating.
40
1
2
fig. 31