Download  Print this page

Advertisement

Reassembly
Insert the locating pegs of the bulb base into their seats
to obtain correct alignment.
Hook the clip (2) to the headlamp holders; reconnect the
connector (1) you have detached previously and refit the
rubber cover.
The parking light bulb is fitted on the top section of the
headlamp body. To change it, pull out the bulb holder (3,
fig. 59) from headlamp body.
E
Remove the bulb and fit a new one.
3
fig. 59
54

Advertisement

Table of Contents

This manual is also suitable for:

Motor holding supersport 1000

Comments to this Manuals

Symbols: 0
Latest comments: