Half-faired version (fig. 38)
Unscrew the screw (3) that holds each body panel to the
lower support bracket.
Disconnect the indicator connectors and remove the
Fully-faired version (fig. 39)
Unscrew the screw (4) that holds the left body panel to
the side stand fixing plate. Unscrew the screw (5) that
holds the right body panel to the rear brake pedal shaft.
Disconnect the indicator connectors.
Unscrew the four screws (6) that join the body panels
together at the bottom end and remove the body panels.
Omit this latter step if you wish to remove both body
panels together. Simply slide them off from under the
motorcycle. Be sure not to force them apart to avoid