Right switch (fig. 14)
1) Switch, light switch, three positions:
= light off;
number plate and instrument panel lights on;
= headlight, front and rear parking lights,
number plate and instrument panel lights on.
This device is not fitted on the Australia and Japan
2) Switch for ENGINE STOP, two positions:
(RUN) = run.
(OFF) = stop.
This switch is mainly intended for use in emergency
cases when you need to stop the engine quickly. After
stopping the engine, return the switch to the
to enable starting.
Riding with the lights on, stopping the engine using
switch (2) and leaving the ignition key in the ON
position, may run the battery flat as the lights will remain
= engine start.
= front and rear parking lights,