Conversion from natural gas to LPG
The replacement/conversion from natural gas to LPG should only be
undertaken by a competent person.
It is important to note that this model is designed for use with natural gas but can be
converted for use with butane or propane gas providing the correct injectors are
fitted. The gas rate is adjusted to suit.
1. Ensure that the gas taps are in the
2. Isolate the hob from the electricity
3. Remove all pan supports, burner caps,
rings, crowns and control knobs.
4. With the aid of a 7mm box spanner
the burner injectors can then be
unscrewed and replaced by the
appropriate LPG injectors (Fig. 6).
With the aid of 7 mm fork spanner
the dual burner side injectors can
be unscrewed and replaced by
the appropriate LPG injectors
To reassebly the parts, proceed in
reverse order as just described.
TO ADJUST THE GAS RATE
With the aid of a thin bladed screwdriver
completely tighten down the by pass
adjustment screw. Upon completion stick
the replacement rating plate on the under
side of the hob.