REMOVING THE TRANSPORT SUPPORT
3
REAR SPACERS
LEVELLING
DOOR REVERSIBILITY
In case you want to change the opening di-
rection of the door, contact the nearest Af-
Your appliance is equipped with transport
support to secure the door during trans-
portation.
To remove them do these steps:
• Open the door.
• Remove the transport support from the
door sides.
• Remove the transport support from the
lower hinge (some models).
Some models are fitted with a si-
2
lencing pad under the cabinet. Do
not remove this pad.
• Install the spacers provided within the
accessory bag as shown in the figure.
• Install the spacers on the brackets of the
condenser (black grill) at the back of the
appliance.
When placing the appliance ensure that it
stands level. If necessary adjust the feet us-
ing the adjustment spanner supplied.
ter Sales Service Force. The After Sales
Service specialist will carry out the reversi-
bility of the doors at your cost.
ENGLISH
17