Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG Electrolux ÖKO FAVORIT 54200
Summary of Contents for AEG Electrolux ÖKO FAVORIT 54200
- Page 1 ÖKO FAVORIT 54200 User manual Dishwasher...
-
Page 2: Table Of Contents
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. -
Page 3: Operating Instructions
Safety information Operating instructions Safety information For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. Correct use •... -
Page 4: Installation
Product description Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. •... -
Page 5: Control Panel
Control panel Spray arm Microfilter Detergent dispenser Rinse aid dispenser Flat filter Salt container The rating label is on the back of appliance. Control panel On/off button Programme selection buttons Save energy button /(ÖKO PLUS) Delay start button Indicator lights Digital display Function buttons Indicator lights... -
Page 6: Delay Start Button
Control panel Indicator lights The indicator light comes on when the drying phase operates. The indicator light comes on when the washing programme is completed. The indicator light comes on when it is necessary to fill the salt container. Refer to the chapter 'Use of dishwasher salt'. -
Page 7: Setting Mode
Use of the appliance Setting mode The appliance is in setting mode when all programme indicator lights are on. The appliance must be in setting mode for these operations: – To set a washing programme. – To set the water softener level. If a programme indicator light is on, cancel the programme to go back to the setting mode. -
Page 8: Electronic Adjustment
Use of dishwasher salt Electronic adjustment The water softener is set at the factory at level 3. 1. Switch on the appliance. 2. Make sure that the appliance is in setting mode. 3. Press and hold function buttons B and C until the indicator lights of function buttons A, B and C start to flash. -
Page 9: Use Of Rinse Aid
Use of rinse aid 5. Turn the cap clockwise to close the salt container. It is normal that water overflows from the salt container when you fill it with salt. When you set the water softener to level 1, the salt indicator light does not stay on. Use of rinse aid CAUTION! Only use branded rinse aid for dishwashers. -
Page 10: Loading Cutlery And Dishes
Loading cutlery and dishes To adjust the dosage of rinse aid, refer to the washing results ("What to do if..."). Start with the lowest dosage. Turn the arrow clockwise to increase the dosage. Increase the dose if there are water droplets or limescale on the dishes. Loading cutlery and dishes Helpful hints and tips CAUTION! -
Page 11: Cutlery Basket
Use of detergent Cutlery basket WARNING! Do not put long-bladed knives in a vertical position to prevent injury. Arrange long and/or sharp items of cutlery horizontally in the primary basket. Be careful with sharp items such as knives. Use the cutlery basket for: •... -
Page 12: Use Of Detergent Tablets
Washing programmes Use of detergent tablets Put the detergent tablet in the detergent dispenser (A). Detergent tablets contain: • detergent • rinse aid • other cleaning agents. Do these steps to use detergent tablets: 1. Make sure that the detergent tablets are applicable for your water hardness. Refer to the instructions from the manufacturer. -
Page 13: Setting And Starting A Washing Programme
Setting and starting a washing programme Energy Degree Type of Save op- Programme Programme description of soil load tion Selectable, Normal Crockery Main wash up to 50°C no impact 30 MIN or light and cut- 1 intermediate rinse on washing soil lery Final rinse... -
Page 14: Cancelling A Washing Programme
Setting and starting a washing programme – The washing programme starts automatically. – The phase indicator light for the washing programme is on. When the washing programme operates, you cannot change the programme. Cancel the washing programme. WARNING! Only interrupt or cancel a washing programme if necessary. CAUTION! Open the door carefully. -
Page 15: End Of The Washing Programme
Care and cleaning You can select the washing programme and delay start also with the door closed. When you press a programme button you have only 3 seconds to select a different washing programme or a delay start. After these 3 seconds, the selected programme starts auto- matically. -
Page 16: Clean The Spray Arm
What to do if… The appliance has 2 filters: 1. microfilter 2. flat filter Do these steps to clean the filters: 1. Open the door. 2. Remove the basket. 3. Remove the filters in the bottom of the ap- pliance. 4. - Page 17 What to do if… Fault code and malfunction Possible cause and solution • digital display shows • The water tap is blocked or furred with limescale. The dishwasher does not fill with Clean the water tap. water • The water tap is closed. Open the water tap.
-
Page 18: Technical Data
Technical data The cleaning results are not satisfactory The dishes are not clean • The selected washing programme is not applicable for the type of load and soil. • The basket is loaded incorrectly so that water cannot reach all surfaces. -
Page 19: Positioning
Water connection When you put the appliance in place, make sure that the water hoses are not kinked or squashed. Install the appliance on a kitchen sink, worktop or built-in.. Positioning Install the dishwasher into the furniture of the kitchen. Make sure that the dimensions of the recess agree with the given dimensions. -
Page 20: Drain Hose
Water connection Connect the inlet hose to a water tap with an external thread of 3/4”. If the water inlet hose is too short, replace the water inlet hose with an applicable, longer high-pressure hose. Do not connect an exten- sion hose. -
Page 21: Electrical Connection
Electrical connection If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not re- move the membrane, remaining food can cause a blockage in the drain hose spigot Electrical connection WARNING! The manufacturer is not responsible if you do not follow these safety precautions. - Page 24 www.aeg-electrolux.lu...