Indication Lights; Warning Lights - Electrolux ultrapower User Manual

Cordless stick vacuum cleaner
Hide thumbs Also See for ultrapower:
Table of Contents

Advertisement

Indication lights – normal operation
18 Volt and 24 Volt version :
Orange light during operation
25,2V version (Li-Ion battery) :
1 – 3 Orange lights during operation
18 V and 24 V version :
Orange light blinking during operation
Orange light when placed in the charging stand
Orange light blinks slowly every 5 seconds in the
charging stand .

Warning lights

Orange light blinking + product stops
Red light - blinking
Red + Orange light blinking + BRUSH ROLL CLEAN™
function does not work + headlights are turned OFF
RED light – constant + ULTRAPOWER stops
표시등 - 정상 작동
24V 제품 (ZB5011):
작동 중 오렌지 등 켜짐
25.2V 리튬-이온 제품 (ZB5012):
작동 중 1 – 3개의 오렌지 등 켜짐
24V 제품 (ZB5011):
작동 중 오렌지 등 깜빡임
충전 스탠드에 놓여 있는 경우 오렌지 등 켜짐
오렌지 등이 충전 스탠드에서 느리게 매 5초마다
깜빡입니다.
경고등
오렌지 등 깜빡임 + 제품 멈춤
적색등 - 깜빡임
적색 + 오렌지 등 깜빡임 + 브러쉬 자동 청소™
기능 작동 안 함 + 전조등 꺼짐
적색등 - 일정하게 유지 + ULTRAPOWER 멈춤
What does it mean ?
No problem, battery capacity is still good
3 lights = Battery capacity is still good > 75 % left
2 lights = Battery capacity is still good > 25 % left
1 light = ULTRAPOWER will stop in a few minutes.
Battery capacity is running low.
Ultrapower will stop in a few minutes.
No problem - ULTRAPOWER is being charged
No problem – ULTRAPOWER is fully charged.
What is the problem
Battery is empty
The brush roll is jammed.
The BRUSH ROLL CLEAN ™ function has been used for too long
time.
ULTRAPOWER is overheated or has electrical contact problems.
무엇을 의미합니까?
문제 없음. 배터리 용량 양호
3개 등 = 배터리 용량 양호, 75% 이상 남아있음
2개 등 = 배터리 용량 양호, 25% 이상 남아있음
1개 등 = ULTRAPOWER가 몇 분 안에 멈춥니다.
배터리 용량이 낮아지고 있습니다.
ULTRAPOWER가 몇 분 안에 멈춥니다.
문제 없음 - ULTRAPOWER가 충전되고 있습니다.
문제 없음 - ULTRAPOWER가 완전히 충전되었습니다.
문제가 무엇입니까?
배터리가 없습니다.
브러쉬 롤이 무언가에 걸렸습니다.
브러쉬 자동 청소™ 기능을 너무 오랫동안 사용하였습니다.
ULTRAPOWER가 과열되었거나 전기 접촉 문제가 있습니다.
What to do
OK
OK
OK
Finish cleaning + charge ULTRAPOWER
Finish cleaning + charge ULTRAPOWER
OK
We recommend to keep ULTRAPOWER in the charging
stand after using it.
The power consumption in standby is very low
What to do
Charge ULTRAPOWER.
Remove the brush roll and clean it manually ( see page
24)
Place ULTRAPOWER in the charging stand for 10 minutes
to reset the function.
Clean the filters . Check the hose and nozzle for
blockages. Check battery pack connections. If this does
not help, please contact a service station.
무엇을 해야 합니까?
확인
확인
확인
청소 종료 + ULTRAPOWER 충전
청소 종료 + ULTRAPOWER 충전
확인
사용한 후에는 ULTRAPOWER를 충전 스탠드에
두시기 바랍니다.
대기 전력 소모는 매우 적습니다.
무엇을 해야 합니까?
ULTRAPOWER를 충전하십시오.
브러쉬 롤을 빼서 수동으로 청소합니다( 24페이지
참조).
충전 스탠드에 ULTRAPOWER를 10분간 놓고
기능을 다시 설정하십시오.
필터를 청소합니다. 호스와 노즐이 막혀있는지
확인합니다. 배터리 팩 연결 상태를 확인합니다.
이 문제가 해결 되지 않는 경우, 서비스 센터에
문의하십시오.
27 27
EN
KR
IND
CH
TH
TW
VIET

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ultrapower 18vUltrapower 24vUltrapower 25,2v

Table of Contents