Important Safety Information - Nokia Mobile Phone User Manual

10. Important safety information

The power supply of the PremiCell 09i/18i (see picture 11) converts line voltage of 110V /220V/
230V AC to low voltage DC.
The power supply ACW-2U with US power plug converts line voltage of 110 V AC to low voltage
DC. Use this power supply only in countries and locations where the line voltage is 110 V AC.
Note: The power supply ACW-2U cannot be used with the line voltage of 220V /230 V.
Note: The power supply socket should be easily accessible and it must not be covered. The power
supply is insulation class 2 approved.
ACW-2
EU 230V
Picture 11. Power supplies for Nokia PremiCell 09i and 18i terminals
WARNING! Dangerous voltage. Do not attempt to open the casing.
Note! This power supply is for indoor use only ! Do not expose the unit to water, rain or dust.
The power supply should be disconnected from the socket when the terminal is not in use for a
prolonged period of time or when the power supply is not connected to the terminal.
When you disconnect the power cord of the power supply, grasp and pull the plug, not the cord.
IMPORTANT! Use only the power supply approved by Nokia. The use of any other types will
invalidate any approval or warranty applying to the terminal, and may be dangerous.
È
1999 Nokia Mobile Phones. All Rights Reserved.
ACW-2P/2U
US 220/110V
ACW-2X
UK 230V
19