Mitsubishi Electric PAR-21MAA Operating Manual page 12

<Using Ventilation>
On Mr. Slim models
G To run the ventilator together with the indoor unit:
I Press the ON/OFF button 1.
• The Vent indication appears on the screen (at 8). The ventilator will now
automatically operate whenever the indoor unit is running.
G To run the ventilator independently:
I Press the Mode button 2 until
appears on the display. This will cause the
ventilator to start.
G To change the ventilator force:
I Press the Ventilation button 8 as necessary.
• Each press toggles the setting, as shown below.
Low High
On CITY MULTI models
G To run the ventilator together with the indoor unit:
I Press the ON/OFF button 1.
• The Vent indication appears on the screen (at 8). The ventilator will now
automatically operate whenever the indoor unit is running.
G To run the ventilator only when the indoor unit is off:
I Press the Ventilation button 8 while the indoor unit is off.
• The On lamp (at 1) and the Vent indication (at 8) come on.
G To change the ventilator force:
I Press the Ventilation button 8 as necessary.
• Each press toggles the setting, as shown below.
(Low) (High)
Note:
G With some model configurations, the fan on the indoor unit may come on even when
you set the ventilator to run independently.
– 10 –
No display
(Stop)
(OFF)