Page 2
3. Speaker unit can work with battery or DC adaptor(not included) 4. Suitable for most iPods 5. iPod slots in to the dock situated on top of the speaker system 6. There are two ways to control the volume, control the transmit volume from dock station or control the receiver volume from speaker 7.
Page 3
PUSH remote control to turn the dock on, the indicator light will turn from red to blue (4). If you want to put the speaker system back in standby mode, press RELEASE the power/standby button again and the indicator light will turn from blue to red.
11. Pressing button (28) will allow you to switch between your iPod and any other audio source you have connected to the speaker system Video Out 12. Connect the video jack (11) to your TV set and then enter into the iPod Menu system to setup the TV output option to on.
Page 5
Battery Charge 16. If you have rechageable batteries inserted and a 12V/1.5A “ power supply (not supplied). you can charge your batteries in the unit. Specification 1. ipod docking station power supply ( included)... DC 12V/0.5A 2. Speaker power...2 x 8 AA batteries or 12V/1.5A + centre pin ( not supplied) 3.
Need help?
Do you have a question about the GSPK26W and is the answer not in the manual?
Questions and answers