12. At the end of the programme
The machine stops automatically.
Release of the lock is indicated when
Turn the programme selector dial to position "
switch the machine off.
Remove the laundry from the drum and carefully
check that the drum is empty.
If you do not intend to put in another wash, turn off
the water tap. Leave the door open to prevent from
forming mildew and unpleasant smells.
RINSE HOLD option has been selected,
END light goes on to indicate that the water
must be drained before opening
the door. To drain the water follow these three steps:
A) Turn the programme selector dial to "
B) Select programmes "Q" (DRAIN) or "R" (SPIN).
• If programme "R" (SPIN) has been selected:
Use the spin speed selector dial to choose the
required speed. If the dial is kept in the same
position as at the beginning, in other words
RINSE HOLD (no-wrinkle) position, the machine
will spin at 400 r.p.m.