Before washing your first load of laundry, we recommend that you run a cotton cycle at 60° C, with the machine
empty, in order to remove any manufacturing residue from the drum and tub. Pour half of the normal amount of
detergent into the main wash compartment and start up the machine.
1. Place the laundry in the drum
Open the door by pulling the handle outwards. Place
the laundry in the drum, one item at a time, shaking
them out as much as possible. Close the door.
2. Measure the detergent
Pull out the dispenser drawer until it stops.
Measure the required amount of detergent, pour it
into the main wash compartment
progamme with PRE-WASH).
3. Measure the fabric softener
If required, pour fabric softener into the compartment
(the amount used must not exceed the
"MAX" mark in the drawer).
Close the drawer gently.
and into the
(if you have selected a
4. Select the required programme
Turn the programme selector to the required
5. Select the spin speed or
RINSE HOLD option.
Turn the spin selector to the required position.
Model FA 1026
6. Select the required option push
Model FA 826