Building-In; Electrical Connection - AEG ARCTIS User Manual

Installation option 2:
Operation of E-appliances is possible
even without a ventilation opening in
the furniture plinth. The fresh air able to
enter under the appliance is sufficient
for ventilation. The function and life of
the appliance are not impaired. The
warmed air must be able to be exhaust-
ed upwards through the air shaft (min.
2
200 cm ) on the furniture back. If the
appliance is ventilated without a plinth
opening, however, the energy consump-
tion may differ from that specified in
the brochure.
Important note! In order not to impair the function of the appliance,
never cover or obstruct the ventilation openings.

Building-in

See installation instructions supplied.
Please check whether, after installing your appliance and especially
after rehingeing the door, the door seal seals right round. An untight
door seal may lead to heavy frosting and thereby to a higher power
consumption (see also „What to do if...").

Electrical connection

A correctly installed, earthed socket is required for the electrical sup-
ply. The supply must have a fuse rating of at least 10 Amps. If the
socket is not accessible once the appliance is built in, the electrical
installation must include suitable means of isolating the appliance
from the mains (e.g. a fused spur).
Before initial start-up, refer to the appliance rating plate to ascertain
if supply voltage and current values correspond with those of the
mains at the installation location.
e.g.: AC 220 ... 240 V 50 Hz or
220 ... 240 V ~50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
Installation
29