Accessories On Request; Utensil Holder; Assembling The Ceramic Tiles Kit; Protection Cover - Electrolux EGL4500X User Manual

Table of Contents

Accessories on request

The utensil holder is a steel frame for storing utensils and tools inside

the gas bottle compartment.

To fit the holder, proceed as follows:

• open the door of the gas bottle compartment;

• place the frame onto the 4 fastening pins A already secured to the

inside of the door;

• push the frame downwards until the pins fit into the slots B.

To remove the frame, lift upwards then away from the pins.

1. Remove the grill grates "A", griddles "B" and disperser "C" (one per kit to be installed).

2. Place the two side supports "D" and the central support "E" (for double kit only) in the combustion

chamber.

3. Position the crosspieces "F" in the slots made in supports "D" and "E".

4. Rest the tiles on the frame as shown in the figure.

5. Replace the grill grates "A" and griddles "B".

THE DISPERSER "C" (ONE PER KIT) IS NOT REPLACED, AS IT WOULD NOT FIT WITH THE TILES ASSEMBLED.

TO ASSURE A GOOD WORKING, TAKE CARE THAT THE CERAMIC TILES HOLES GET NOT OBSTRUCTED.

OVERTURN THE TILES REGULARLY TO LET THE BURNERS CARBONATE THE COOKING RESIDUALS.

PVC waterproof plastic material, to be used for covering and housing in the open air the barbecue in the

trolley version. To clean use water and neutral detergent.

Installation

Table of Contents