Removing The Base Grille - Whirlpool 2193496 User And Care Manual

Removing the base grille
I
Burn Hazard
Doing so can result in burns.
Do not touch refrigeration tubes near
defrost pan.
To remove the base grille:
1. Open the refrigerator door.
2. Grasp the grille with both hands.
3. Push down on the top edge of the grille to release
the top clips.
4. Tilt the grille toward you to release the bottom clips.
5. Pull grille away from the refrigerator.
NOTE: Do not remove the Tech Sheet fastened behind
the grille.
To replace the base grille:
1. Line up the edges of the grille with the outside edges
of the cabinet.
2. Roll the grille toward you.
3. Place lower clips in the openings in the metal panel.
4. Roll the grille toward the cabinet until the top clips
snap into place.
5. Close the refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 21.
Condenser coils
Defrost pan
16