Table of Contents
Advertisement
Solid Element Surface Units
3. IMPORTANT:
After cleaning,
apply
a thin coat of salt-free oil to
the CCCL surface units, then heat
3-5 minutes.
DO NOT
leave ele-
ments unattended
while ON. Oil
may smoke slightly when heated.
If surface units have dark spots
caused
by grease
and food, the
oil treatment
will improve
their ap-
pearance
but not eliminate
the
spots. NOTE: Optional Eiectroi
dressing can be applied
to the
surtace units to improve their
appearance.
2. For best results, wipe off surface
units with a damp
soft cloth and
soapy
water after each use.
Burned-on
food may be removed
with a soapy
scouring
pad. The
red spot in the center of the sur-
face unit will gradually
wash off.
This is normal and will not affect
the operation
of the surface unit.
4. The stainless steel trim rings will
gradually
yellow
from the heat
of the surface units and pans. This
is normal. The yellowing
can be
removed
by using stainless steel
cleaner
or Cook Top Polishing
Creme on the trim rings.
To obtain
order information
for Cook Top Polishing Creme
(PN 814009) or Electrol dressing
(PN 814030), write to:
Whirlpool
Corporation
Attention:
Customer
Service
Dept.
1900 Whirlpool
Drive
LaPone, IN 46350s
8
Advertisement
Table of Contents
