Buffalo WZR-HP-AG300H User Manual page 87

Chapter 4 Configuration
Parameter
Broadcast SSID
Allow multiple SSIDs
Use Single SSID
SSID1
SSID2
SSID3
Separate
SSID
Wireless authentication
WZR-HP-AG300H User Manual
Meaning
If [Allow] is checked, then the AirStation will respond to SSID
searches from wireless devices by broadcasting its SSID. If [Allow] is
unchecked, then the AirStation ignores SSID searches from wireless
devices.
Clicking [Allow multiple SSIDs] will enable Multi Security, allowing
the use of multiple SSIDs, each with different wireless security
settings. Clicking [Use Single SSID] will disable Multi Security.
The AirStation will then allow one SSID and one type of wireless
security.
Note: When using Multi Security, enable at least one of the following:
SSID1, SSID2, or SSID3.
Multi Security SSID1 can use WPA-PSK-TKIP or WPA/WPA2-Mixed for
wireless security.
Multi Security SSID2 can use WPA-PSK-AES for wireless security.
Multi Security SSID3 can use WEP for wireless security.
When enabled, wireless devices connected to the AirStation can
communicate only with the Internet side, not with each other.
Set SSID using 1 - 32 alphanumeric characters.
Specifies an authentication method used when connecting to a
wireless device.
52