Keep Alive; Commands; Factory Defaults; Firmware Upgrade - Buffalo WZR-HP-AG300H User Manual

Portuguese, Romanian, Russian, Slovenian, Spanish, and Swedish.
default setting is English.
Before using Telnet or SSH, activate the associated service(s) in this
section.
2.3.7.2.

Keep Alive

Keep-Alive lets you configure monitoring options that automatically
reboot the router if a service malfunction causes it to fail to
respond.
2.3.7.3.

Commands

Entering Linux commands is one of the most powerful ways to access the
router's functionality. This enables you to access services and
configure options that are not accessible via the Web GUI. Using shell
commands can lead to unexpected results. Use them with utmost care.
Aside from executing the shell commands directly you can also save
custom start up and firewall scripts.
2.3.7.4. WOL
With Wake-on-LAN, you can send special data packets to compatible
devices on your LAN, causing them to exit sleep mode.
WOL data packets can be triggered manually or scheduled automatically.
2.3.7.5.

Factory Defaults

With this feature you can reset the router's settings to factory
defaults. After a reset, the router will restart.
2.3.7.6.

Firmware Upgrade

The firmware upgrade option can be used to install a different
firmware version. When doing this you can choose if the router's
settings will be restored to factory defaults or kept.
2.3.7.7.

Backup

You can use this feature to store your current configuration into a
backup file, or to restore from a previously stored configuration.
This also makes it simple to set up a number of routers with the exact
same configuration.
2.3.8.

Status

2.3.8.1.

Router

The status screen displays information about the router, such as cpu
load, memory consumption, and currently active IP connections. Status
is updated automatically.
- 16 -
The