Table of Contents
Advertisement
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by
touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor
fields which activate a desired function. Do not cover other sensor fields.
If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance
switches itself off.
Sensor field
On / Off
Child lock
Triple ring
Multi-purpose
zone
STOP+GO
Automatic warm-
up
Timer
Increase settings
Reduce settings
Control bar
The control bar is a special Touch Control field. The
control bar is touched where the desired heat set-
ting is positioned. The heat setting is shown in the
display. Correct to the left or the right, if neces-
sary. Do not release before the desired heat setting
is reached.
If the control bar is touched for longer than 6
seconds, a signal sounds and the appliance
switches itself off.
Displays
/
-
Switches appliance on and off
Locking control panel for children
To switch outer rings on and off
To switch outer rings on and off
To switch the Keep Warm setting on/ off
To switch the automatic warm-up function on and off
Timer selection
To increase Timer time
To reduce Timer time
Display
Keep Warm settings
Heat settings
Automatic Warm-up
Fault
Residual heat
Description of the appliance
Function
Description
The cooking zone is switched off
Keep Warm / STOP+GO function is switched on
To set heat settings
The Automatic Warm-up function is switched on
Malfunction has occurred
Cooking zone is still hot
5
A
Advertisement
Table of Contents
