Select And Start A Washing Programme - Electrolux FAVORIT 65010 VI User Manual

Select and start a washing programme

Select the washing programme and delay start with the door slightly opened.
The start of the programme or the countdown of the delay start will occur
only after the closure of the door. Until then it is possible to modify the
settings.
1. Check that the baskets have been loaded correctly and that the spray arms are
free to rotate.
2. Check that the water tap is opened.
3. Press the On/Off button. The dishwasher must be in setting mode.
4. Press the button corresponding to the required programme (see "Washing
programmes" chart). Close the dishwasher door, the programme starts
automatically.
Setting and starting the programme with delay start
1. After having selected the washing programme, press the delay start button
until the number of hours for the delay start appear in the digital display. The
start of the selected washing programme can be delayed for between 1 and 19
hours.
2. Close the dishwasher door, the countdown starts automatically.
3. The countdown will decrease with steps of 1 hour.
4. The opening of the door will interrupt the countdown. Close the door; the
countdown will continue from the point at which it was interrupted.
5. Once the delay start has elapsed the programme will start automatically.
Once the washing programme has started, a point-shaped optical signal appears
on the floor beneath the dishwasher's door.
This optical signal will remain illuminated for all the duration of the washing pro-
gramme.
If the appliance has been installed higher up with a furniture door mounted flush,
the optical signal will be no longer visible.
WARNING!
Interrupt or cancel a washing programme in progress ONLY if it's absolutely
necessary. Attention! Hot steam may escape when the door is opened. Open
the door carefully.
Select and start a washing programme 25