Table of Contents
Advertisement
Warning
Failure to observe the instructions on cleaning the unit
and changing the filters will cause a fire hazard. You are
therefore strongly recommended to follow these
instructions.
Changing the light bulb
Disconnect the unit from the mains power supply.
Remove the grid.
Replace the old light bulb with a new light bulb (40 W
max.).
If the light does not come on, make sure the bulb has
been screwed in correctly before contacting the technical
assistance service.
Cleaning
Warning: always disconnect the hood from the mains
power supply before cleaning it.
Never insert pointed objects in the motor's protective
grid.
Wash the outside surfaces using a delicate detergent
solution. Never use caustic detergents or abrasive brushes
or powders.
Only ever clean the switch panel and filter grille using a
damp cloth and delicate detergents.
It is extremely important to clean the unit and change the
filters at the recommended intervals. Failure to do so will
cause grease deposits to build up that could constitute a
fire hazard.
32
Advertisement
Table of Contents
