General Setup; Setting The Mode Timer; Setting The Paper Type - Brother MFC-425CN User Manual

General Setup

Setting the Mode Timer

The machine has four temporary mode keys on the control panel:
PhotoCapture, Copy, Fax and Scan. You can change the number of
seconds or minutes the machine takes after the last Copy, Scan or
PhotoCapture operation before it returns to Fax mode. If you select
Off, the machine stays in the mode you used last.
1
Menu/Set
Press
2
Press ▲ or
5 Mins or Off.
3
Menu/Set
Press
4
Stop/Exit
Press

Setting the Paper Type

To get the best print quality, set the machine for the type of paper you
are using.
1
Menu/Set
Press
2
Press or
▲
Transparency.
Menu/Set
Press
3
Stop/Exit
Press
The machine ejects paper with printed surfaces face up onto the
paper tray in the front of the machine. When you use
transparencies or glossy paper, remove each sheet immediately
to prevent smudging or paper jams.
2 - 3 GETTING STARTED
1 1
, , .
▼ to select 0 Sec, 30 Secs, 1 Min, 2 Mins,
.
.
1 2
, , .
to select Plain, Inkjet, Glossy or
▼
.
.