Cleaning And Care; Outside Of The Appliance; Cooking Surface - AEG COMPETENCE 30006FF Installation And Operating Instructions Manual

Free standing electric cooker
Hide thumbs Also See for COMPETENCE 30006FF:
Table of Contents

Advertisement

Cleaning and Care

1
Warning: For cleaning, the appliance must be switched off and cooled
down.
Warning: For safety reasons, do not clean the appliance with steam jet
or high-pressure cleaning equipment.
Attention: Do not use any scouring agents, sharp cleaning tools or
scourers.

Outside of the appliance

• Wipe the front of the appliance with a soft cloth and warm water
and washing up liquid.
• For metal fronts, use normal commercially available cleaning agents.

Cooking surface

3
Clean the hob after each use when it is warm to the touch or cold using
hot water and washing up liquid. This will avoid spillages becoming
burnt on.
1. Remove heavy soiling with fine scouring sand or a scouring pad.
2. Wipe away residues with a damp cloth.
3. Then warm the hotplate a little and leave to dry.
4. To keep the hotplates in good condition occasionally rub in a little sew-
ing machine oil and then polish with absorbent paper.
1
Important: Do not clean the stainless steel hob surround with scouring
sand or a scouring pad as this causes scratching!
Use only suitable stainless steel cleaners and –polishes for cleaning
stainless steel hobs. Please follow the manufacturer's instructions.
General information
• Heat the hotplates briefly after cleaning to dry them.
• Do not put any damp or wet items on the hotplates.
• Dry pots and pans with a cloth before placing them on the hotplates.
3
The stainless steel hob surround may discolour slightly during cooking
due to thermal loading. This is a physical response.
32

Advertisement

Table of Contents
loading

Table of Contents