Something Not Working; Correcting Malfunctions - AEG SANTO Operating Instructions Manual

Something not Working

Correcting Malfunctions

A malfunction may be caused by only a minor fault that you can rectify
yourself using the following instructions. Do not perform any other
work on the appliance if the following information does not provide
assistance in your specific case.
Warning! Repairs to refrigerators may only be performed by qualified
1
service engineers. Improper repairs can give rise to significant hazards
for the user. If your appliance needs repairing, please contact your spe-
cialist dealer or our Customer Service.
Symptom
No power to the appliance.
Appliance cools too much.
The food is too warm.
818 18 88-00/2
Possible Cause
Appliance is not switched
on.
Mains plug is not plugged
in or is loose.
Fuse has blown or is defec-
tive.
Mains socket is defective.
Temperature is set too cold.
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Solution
Switch on the appliance.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to
be corrected by an electri-
cian.
Turn the temperature regu-
lator to a warmer setting
temporarily.
Please look in the " Tem-
perature Adjustment" sec-
tion.
Open the door only as long
as necessary.
Press the COOLMATIC and/
or FROSTMATIC button.
Turn the temperature regu-
lator to a colder setting
temporarily.
Please look in the "Installa-
tion" section.
35