Temperature Setting Buttons; Temperature Adjustment - Electrolux ARCTIS 70250-2 GS User Manual

Electrolux freezer
Table of Contents

Advertisement

Available languages

Available languages

Temperature setting buttons

The temperature is adjusted using the „B" and „D" buttons. These buttons
are connected to the temperature display.
• The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the
DESIRED temperature (Temperature display flashes) by pressing one of the
two buttons, „B" or „D".
• Each time one of the two buttons is pressed again the DESIRED
temperature is adjusted by 1 °C. The DESIRED temperature must be
reached within 24 hours.
If neither button is pressed, the temperature display automatically switches
back after a short period (approx. 5 sec.) to the display of the ACTUAL
temperature.
DESIRED temperature means:
The temperature that has been selected for inside the freezer. The DESIRED
temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the freezer.
The ACTUAL temperature is indicated with illuminated numbers.

Temperature Adjustment

1.
Press either the „+" (WARMER) or „-" (COLDER) button.
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
2.
To adjust to a warmer temperature, press the „+" (WARMER) button. To
adjust to a colder temperature, press the „-" (COLDER) button. The changed
setting is immediately displayed on the temperature display. Each time one
of the two buttons is pressed again the DESIRED temperature is adjusted by
1 °C.
The following DESIRED temperature settings are possible:
• Operating mode "Freezing": from -15 °C up to -24 °C in 1 °C steps;
If the buttons are not pressed again the temperature display will change
after approx. 5 seconds from the DESIRED temperature to the ACTUAL
temperature. The display changes from flashing to illuminated numbers.
Important! Please check red warning display and temperature display
regularly to assure maintenance of the storage temperature.(see the chapter
"Temperature Adjustment").
71

Advertisement

Table of Contents
loading

Table of Contents