13.10 Electrical installation
Only a qualified and competent
person must do the electrical in-
14. ENVIRONMENT CONCERNS
Recycle the materials with the
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
. Put the packaging in
How to install the anti-tilt protection
Set the correct height and area for
the appliance before you attach the
Make sure that the surface behind
the appliance is smooth.
Install the anti-tilt protection 232 -
237 mm down from the top surface
of the appliance and 110 - 115 mm
from the side of the appliance into
the circular hole on a bracket. Screw
it into the solid material or use appli-
cable reinforcement (wall).
You can find the hole on the left side
at the back of the appliance. See the
If you changed the dimensions of
the cooker, you must align the non-
tip device correctly.
This appliance is supplied with a main
plug and a main cable.
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
If the space between the bench
cupboards is larger than the
width of the appliance, you must
adjust the side measurement to
center the appliance.
The manufacturer is not responsi-
ble if you do not follow safety
precautions from chapter "Safety
The power cable must not touch
the part of the appliance shown
in the illustration.