Making The Electrical Connections; To Remove Cover Of Mains Terminal - AEG COMPETENCE 5212 BU Operating Instructions Manual

INSTALLATION INSTRUCTIONS
TO REMOVE COVER OF MAINS
TERMINAL
From the rear of the cooker, remove mains
input terminal cover to gain access to terminal
block.
First remove retaining screw with pozidrive
screwdriver. See Fig. 9.
Prise cover loose using screwdriver in
position (1) then lever off with screwdriver in
position (2) at either side. See Fig. 10.
Lift cover and remove screw from cable
clamp. See Fig. 11.
60
Fig. 9
Fig. 10
Fig. 11