GMC 300W Instruction Manual

GMC 300W Instruction Manual

Gmc 300w mini electric stapler/nailer instruction manual

Advertisement

INSTRUCTION MANUAL
300W
Mini Electric Stapler/Nailer
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
• Taipei • New York • Verona • London • Paris
MSN
030820 PR ED3

Advertisement

Table of Contents
loading

Summary of Contents for GMC 300W

  • Page 1 INSTRUCTION MANUAL 300W Mini Electric Stapler/Nailer • Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • Paris 030820 PR ED3...
  • Page 2: Table Of Contents

    Contents Warranty Introduction Description of symbols Specifications General safety instructions Additional safety rules for staplers/nailers Know your product Operation Loading the stapler/nailer Direction of use Maintenance Cleaning Repairs Full 2 Years Home Use Warranty Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our required level of performance and you may need the...
  • Page 3: Introduction

    Specifications Voltage: 240V ~ 50Hz Wattage: 300W Staple Size: 18 Gauge, 10.6mm Medium Crown (equiv. to Arrow #50) Staple Length: 6, 8, 10, 12, 14mm...
  • Page 4 Damage to the lungs if an effective breathing mask is not worn. Damage to hearing if effective earmuffs are not worn. Damage to the eyes if effective safety goggles or shield are not worn. Warning. When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury.
  • Page 5: Additional Safety Rules For Staplers/Nailers

    moving parts, breakage of parts, proper mounting and any other conditions that may affect the operation of the tool. A part that is damaged should be properly repaired or replaced by an authorised service facility, unless otherwise indicated in this Instruction Manual.
  • Page 6: Know Your Product

    Know your product 1. Safety Lock 2. Trigger Switch 3. Power Cord 4. On/Off Power Switch 5. Catch 6. Tacking Mouth...
  • Page 7: Operation

    Operation Loading the stapler/nailer 1. Squeeze and pull the release button to unlock the stapler/ nailer. [Fig 1] 2. Use only staples or brad nails recommended. 3. Hold the tool upside down, squeeze the latch and slide open the base. [Fig 2] [Fig 1] 4.
  • Page 8 Carefully read the entire Instruction Manual Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: •...

This manual is also suitable for:

Msn

Table of Contents