Contents Warranty Introduction Description of symbols Specifications General safety instructions Additional safety rules for sanders Contents of carton Unpacking Assembly Know your product Switching on and off Fitting sandpaper Selecting the right grade of sandpaper for the job Sanding Cleaning Maintenance Power cord maintenance Full 2 Years Home Use Warranty...
Dear Customer If you require any help with your product, whether it � is a Warranty claim, spare part or user information, � please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or � 0800 445 721 in New Zealand.
General safety instructions WARNING. When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Also, please read and heed the advice given in the additional important safety instructions. 1.
• Only use good quality sandpaper. • Do not force the sander; let the tool do the work at a reasonable feed speed. Overloading will occur if too much pressure is applied and the motor slows resulting in inefficient sanding and possible damage to the sander motor.
Wear goggles Wear earmuffs Wear a breathing mask Contents of carton The GMC KAT150B SandKat Detail Sander is supplied with the following accessories as standard: • 10 Sandpaper sheets, 4 x 60 Grit, 4 x 120 Grit, 2 x 240 Grit •...
Know your product The sander is designed for sanding wood, metal, plastic and similar materials. It is a finishing sander and should be used only when giving a surface a final sanding. As the base is reasonably small, the sander is suited for accessing tight corners that larger sanders are unable to reach.
(1) on the side marked 1. 2. To turn off the sander, push the on/off switch on the side marked O. Fitting sandpaper 1. Disconnect the sander from the power supply.
3. Switch the sander on whilst it is resting on the workpiece. Take care to hold the whole area of the platen on the work. 4. Move the sander over the surface of the work in a circular motion with an even, moderate pressure. 5. For a cleaner working environment you can use the dust extraction adaptor.
Page 12
Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: GMC Product Type GMC Product Code A GMC Service Engineer will take your call and, in most cases, will be able to solve your problem over the phone.