Related Manuals for Burley SOLO WALK 'N ROLLER
Summary of Contents for Burley SOLO WALK 'N ROLLER
- Page 1 Solo Walk ‘n Roller™ Stroller Supplement To be used in conjunction with the Burley Solo Owner’s Instruction & Safety Manual for models 2004 and beyond. Table of Contents Page Introduction Preparation for Installation III. Mount Wheel Pivot Assembly Using the Walk ‘n Roller Wheel...
-
Page 2: I. Introduction
The Walk n’ Roller has been designed to empower you to bicycle and stroll, all in the same trip. You can bike with your Burley as a trailer to a store or a scenic park, lock your bike and quickly convert the trailer to a stroller, without tools. The conversion from trailer to stroller, and stroller to trailer, is done without removing any Walk n’... -
Page 3: Iii. Mount Wheel Pivot Assembly
The wheel mounts at the end of the trailer’s tongue, at the front of the trailer (see image at left). Burley Solo Walk ‘n Roller Instruction Guide: Models ‘04 and Beyond... - Page 4 • Save the hitch and the d-ring (#3), for reinstallation. • The locking nut(#5), and the bolt (#1), can be discarded. A longer bolt is provided for the next step. Burley Solo Walk ‘n Roller Instruction Guide: Models ‘04 and Beyond...
- Page 5 The bolt must go through the hole in the fl exible coupling; otherwise, hitch could come loose causing an accident resulting in serious injury or death. Burley Solo Walk ‘n Roller Instruction Guide: Models ‘04 and Beyond...
-
Page 6: Iv. Using The Walk 'N Roller Wheel
“bike” appears. With the word “bike” in view, line up the triangular sections and then tighten the knob by hand. Use the similar procedure for converting back to “stroll” position. Burley Solo Walk ‘n Roller Instruction Guide: Models ‘04 and Beyond... -
Page 7: V. Safety Guidelines
• Do not use Walk n’ Roller on stairs or escalators. • Do not use Walk n’ Roller components on any product other than the Burley trailer for which it was designed and tested. • Wear helmets (adult and child) when cycling. Helmets can signifi cantly reduce injury in the event of accident. -
Page 8: Vi. Maintenance
Burley will repair or replace any Walk n’ Roller parts it determines to be defective for the life of the trailer. The owner of a Burley trailer with Walk n’ Roller parts installed must present the trailer for repair at an authorized Burley dealer, together with an original sales receipt or similar proof of purchase.
Need help?
Do you have a question about the SOLO WALK 'N ROLLER and is the answer not in the manual?
Questions and answers