THE CONTROL PANEL
This button switches the dryer on. At the end of the
program, press the button again to switch the dryer off.
This button allows you to start or pause the dryer to
check the contents of the load or perhaps add more
clothes to the load.
NOTE: It will not start or restart a program unless
the door safety button has also been pressed in.
If the safety button is not pressed in a door switch
fault will be indicated (sound "beeps" 6 times).
This button is a feature that permits you to start the
dryer after a defined number of hours, ranging from
3, 6, and 9 hours.
To abort the Delayed Start, press the Start/Pause
button, which puts the machine into paused mode,
allowing you to change the delay time.
NOTE: Make sure you have set the disired program
before setting the delay.
This button allows you to select Buzzer and Crease