Table of Contents
Advertisement
What to do if ...
Correcting Malfunctions
Perhaps a malfunction has been caused by a minor error, which you can
correct yourself with the help of the following instructions. Do not
attempt any further repairs if the following instructions do not help in
each specific case.
1
Warning! Freezers may only be repaired by trained personnel. Repairs
carried out by untrained personnel can lead to substantial danger for
the user. Please contact your dealer or our customer service
department for repairs.
Malfunction
Appliance does not
function, temperature
display is not lit.
Red warning display
flashes, temperature dis-
play shows temperature
below -11 °C, door is
closed.
Red warning display
flashes, warning tone
sounds, temperature dis-
play shows temperature
above -11 °C, door is
closed.
Red warning indicator is
flashing, temperature dis-
play shows a square.
818 22 23-00/1
Possible cause
Appliance is not switched
on.
Mains plug is not inserted
or is loose.
Fuse has blown or is
defective.
Mains socket is defective.
Temperature Warning.
Frozen goods have been
warmed to such an extent
that they have been
partially or completely
thawed.
Temperature Warning.
Frozen goods have been
warmed to such an extent
that they have been
partially or completely
thawed.
A functions error has
occurred.
Remedy
Switch appliance on.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to
be corrected by an
electrician.
Please refer to the section
"Control and Information
Systems".
Please refer to the section
"Control and Information
Systems".
Please make a note of the
indicated error and inform
the customer service
department. Do not open
the appliance door again.
23
Advertisement
Table of Contents
