Yamaha YZF-R1 Owner's Manual page 31

Display brightness, shift timing indi-
cator light and throttle opening posi-
tion display control mode
1
1. Shift timing indicator light activation range
2. Shift timing indicator light
3. Brightness adjustable displays
4. Brightness level
This mode allows you to make changes
to six settings by performing the follow-
ing steps.
1. Turn the key to "OFF".
2. Push and hold the "SELECT" but-
ton.
3. Turn the key to "ON", and then re-
lease the "SELECT" button after
five seconds. The display bright-
ness function is selected.
INSTRUMENT AND CONTROL FUNCTIONS
4. Push the "SELECT" button to
switch the functions in the order
below.
a. Display brightness:
2
This function allows you to ad-
just the brightness of the dis-
plays and tachometer to suit
the outside lighting conditions.
3
b. Shift timing indicator light activ-
ity:
This function allows you to
choose whether or not the indi-
4
cator light should be activated
and whether it should flash or
stay on when activated.
c. Shift timing indicator light acti-
vation:
This function allows you to se-
lect the engine speed at which
the indicator light is activated.
d. Shift timing indicator light deac-
tivation:
This function allows you to se-
lect the engine speed at which
the indicator light is deactivat-
ed.
e. Shift timing
brightness:
3-16
f. Throttle opening position dis-
TIP
The display shows the current setting
for each function, except the shift timing
indicator light activity function.
To adjust the brightness of the multi-
function meter displays and tachometer
1. Turn the key to "OFF".
2. Push and hold the "SELECT" but-
ton.
3. Turn the key to "ON", and then re-
lease the "SELECT" button after
five seconds.
4. Push the "RESET" button to select
the desired brightness level.
indicator light
This function allows you to ad-
just the brightness of the indi-
cator light to suit
preference.
play:
This function allows you to
choose whether or not to show
the throttle opening position
display.
your
3