Table of Contents
Advertisement
Installing the Cart Door Handles
1.
Using a 5/32" allen wrench insert 1 screw
through the inside of the door front into
a bar handle end and tighten securely.
(See Fig. 9)
2.
Insert Bar Handle into the End Cap
attached to the door and then into the
other End Cap and tighten End Cap with
allen wrench and screw. (See Fig. 10)
3.
Complete Door. (See. Fig. 11)
4.
Repeat above steps for the second
door.
Installing the Drip Tray
1.
The drip pan is installed inside of the cart
under the grill head.
2.
Slide the drip pan onto the two ledges located
on the bottom of the grill, by inserting it from
the left side of the cart. (See Fig. 12)
Grill Assembly
Fig. 12
7
Backside of door:
2 screw locations
Screw Holes
End Cap
Bar Handle
Fig. 9
End Cap
Fig. 10
Fig. 11
Advertisement
Table of Contents
