4050-4133255 CLIPSO UK-M5.qxp
Using your pressure
cooker for the first time
7
14/09/04 14:18
Fill the pressure cooker up to 2/3 full with water.
■
Close the lid on the pressure cooker.
■
■
Turn the selector so that it is on
Put the pressure cooker on the heat source at the highest
■
temperature.
!
Turn the pressure cooker so that the unlocking button is
facing you.
■
For Clipso Control pressure cooker, set the timer for 15 minutes
(see chapter on Smart Timer). The pressure indicator moves up after a
few minutes.
■
When steam starts to release from the outlet, lower the heat source
and time for 15 minutes.
For all models
After 15 minutes, turn off the heat.
■
Gradually position the programme selector to
■
When no more steam escapes from the steam outlet and the
■
pressure indicator is down, open the pressure cooker.
■
For Clipso Control, make sure you now remove the timer from its
holder.
Rinse out the pressure cooker under water and dry it.
■
■
Clean the basket with warm water and washing up liquid.
Note: the appearance of marks/stains on the interior base of the
■ ■
pressure cooker does not alter the quality of the metal. It is merely
due to calcium deposits. To remove these, use a scouring pad and
some diluted vinegar.
14
Page 14
.
.