Switching Off The Appliance; Cleaning And Care - AEG ARCTIS 0833-6i Operating And Installation Manual

Integrating freezer
Table of Contents

Advertisement

4.
Insert the plastic scraper into the recess provided under the defrost
water channel and place a collecting basin under it.
5.
Once defrosting is completed keep the scraper for future use;
6.
Turn the thermostat knob to the required setting or replace the plug in
the power socket.
Warning!
Never use metal tools to scrape off the frost
Do not use a mechanical device or any artificial means to speed up the
thawing process other than those recommended by the manufacturer.
A temperature rise of the frozen food packs, during defrosting , may
shorten their safe storage life.

Switching off the appliance

If the appliance is not going to be used for an extended period:
1.
Remove all deep-frozen packages as well as ice trays.
2.
Switch off the appliance by turning the temperature regulator to posi-
tion "0".
3.
Remove the mains plug or switch off or turn out the circuit breaker or
fuse.
4.
Defrost freezer compartment and clean thoroughly (see section:
ÒCleaning and CareÓ).
5.
Leave the door open to avoid the build up of odours.

Cleaning and Care

For hygienic reasons the appliance interior, including interior acces-
sories, should be cleaned regularly.
Warning!
¥ The appliance may not be connected to the mains during cleaning.
Danger of electrical shock! Before cleaning switch the appliance
offand rem ve the plug from the mains, or switch off or turn out the cir-
cuit breaker or fuse.
¥ Never clean the appliance with a steam cleaner. Moisture could
accumulate in electrical components, danger of electrical shock!
Hot vapours can lead to the damage of plastic parts.
¥ The appliance must be dry before it is placed back into service.
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Arctis 1333-6i

Table of Contents